networking_switch_port_settings_view

Get information about switch port
get/v1/system/networking/switch-port-settings/{port}

Path Parameters

port

Responses

Object
addresses

Layer 3 IP address settings.

An IP address configuration for a port settings object.

Object
address

The IP address and prefix.

address_lot_block_id

The id of the address lot block this address is drawn from.

interface_name

The interface name this address belongs to.

port_settings_id

The port settings object this address configuration belongs to.

vlan_id

An optional VLAN ID

bgp_peers

BGP peer settings.

A BGP peer configuration for an interface. Includes the set of announcements that will be advertised to the peer identified by addr. The bgp_config parameter is a reference to global BGP parameters. The interface_name indicates what interface the peer should be contacted on.

Object
addr

The address of the host to peer with.

allowed_export

Define export policy for a peer.

Define policy relating to the import and export of prefixes from a BGP peer.

allowed_import

Define import policy for a peer.

Define policy relating to the import and export of prefixes from a BGP peer.

bgp_config

The global BGP configuration used for establishing a session with this peer.

communities

Include the provided communities in updates sent to the peer.

connect_retry

How long to to wait between TCP connection retries (seconds).

delay_open

How long to delay sending an open request after establishing a TCP session (seconds).

enforce_first_as

Enforce that the first AS in paths received from this peer is the peer's AS.

hold_time

How long to hold peer connections between keepalives (seconds).

idle_hold_time

How long to hold a peer in idle before attempting a new session (seconds).

interface_name

The name of interface to peer on. This is relative to the port configuration this BGP peer configuration is a part of. For example this value could be phy0 to refer to a primary physical interface. Or it could be vlan47 to refer to a VLAN interface.

keepalive

How often to send keepalive requests (seconds).

local_pref

Apply a local preference to routes received from this peer.

md5_auth_key

Use the given key for TCP-MD5 authentication with the peer.

min_ttl

Require messages from a peer have a minimum IP time to live field.

multi_exit_discriminator

Apply the provided multi-exit discriminator (MED) updates sent to the peer.

remote_asn

Require that a peer has a specified ASN.

vlan_id

Associate a VLAN ID with a peer.

groups

Switch port settings included from other switch port settings groups.

This structure maps a port settings object to a port settings groups. Port settings objects may inherit settings from groups. This mapping defines the relationship between settings objects and the groups they reference.

Object
port_settings_group_id

The id of a port settings group being referenced by a port settings object.

port_settings_id

The id of a port settings object referencing a port settings group.

interfaces

Layer 3 interface settings.

A switch port interface configuration for a port settings object.

Object
id

A unique identifier for this switch interface.

interface_name

The name of this switch interface.

kind

The switch interface kind.

Describes the kind of an switch interface.

port_settings_id

The port settings object this switch interface configuration belongs to.

v6_enabled

Whether or not IPv6 is enabled on this interface.

link_lldp

Link-layer discovery protocol (LLDP) settings.

A link layer discovery protocol (LLDP) service configuration.

Object
chassis_id

The LLDP chassis identifier TLV.

enabled

Whether or not the LLDP service is enabled.

id

The id of this LLDP service instance.

link_description

The LLDP link description TLV.

link_name

The LLDP link name TLV.

management_ip

The LLDP management IP TLV.

system_description

The LLDP system description TLV.

system_name

The LLDP system name TLV.

links

Layer 2 link settings.

A link configuration for a port settings object.

Object
autoneg

Whether or not the link has autonegotiation enabled.

fec

The forward error correction mode of the link.

The forward error correction mode of a link.

link_name

The name of this link.

lldp_link_config_id

The link-layer discovery protocol service configuration id for this link.

mtu

The maximum transmission unit for this link.

port_settings_id

The port settings this link configuration belongs to.

speed

The configured speed of the link.

The speed of a link.

port

Layer 1 physical port settings.

A physical port configuration for a port settings object.

Object
geometry

The physical link geometry of the port.

The link geometry associated with a switch port.

port_settings_id

The id of the port settings object this configuration belongs to.

routes

IP route settings.

A route configuration for a port settings object.

Object
dst

The route's destination network.

gw

The route's gateway address.

interface_name

The interface name this route configuration is assigned to.

port_settings_id

The port settings object this route configuration belongs to.

rib_priority

RIB Priority indicating priority within and across protocols.

vlan_id

The VLAN identifier for the route. Use this if the gateway is reachable over an 802.1Q tagged L2 segment.

settings

The primary switch port settings handle.

A switch port settings identity whose id may be used to view additional details.

Object
description

human-readable free-form text about a resource

id

unique, immutable, system-controlled identifier for each resource

name

unique, mutable, user-controlled identifier for each resource

Names must begin with a lower case ASCII letter, be composed exclusively of lowercase ASCII, uppercase ASCII, numbers, and '-', and may not end with a '-'. Names cannot be a UUID, but they may contain a UUID. They can be at most 63 characters long.

time_created

timestamp when this resource was created

time_modified

timestamp when this resource was last modified

vlan_interfaces

Vlan interface settings.

A switch port VLAN interface configuration for a port settings object.

Object
interface_config_id

The switch interface configuration this VLAN interface configuration belongs to.

vlan_id

The virtual network id for this interface that is used for producing and consuming 802.1Q Ethernet tags. This field has a maximum value of 4095 as 802.1Q tags are twelve bits.