Enable a BFD session
Options
--detection-threshold
The negotiated Control packet transmission interval, multiplied by this variable, will be the Detection Time for this session (as seen by the remote system)
--json-body
Path to a file that contains the full json body.
--json-body-template
XXX
--local
Address the Oxide switch will listen on for BFD traffic. If `None` then the unspecified address (0.0.0.0 or ::) is used.
--mode
single_hopmulti_hop
Select either single-hop (RFC 5881) or multi-hop (RFC 5883)
--profile
Configuration profile to use for commands
--remote
Address of the remote peer to establish a BFD session with.
--required-rx
The minimum interval, in microseconds, between received BFD Control packets that this system requires
--switch
The switch to enable this session on. Must be `switch0` or `switch1`.