Add a filtering requirement to a BGP session.
The Oxide BGP implementation can filter prefixes received from peers on import and filter prefixes sent to peers on export. This command provides a way to specify import/export filtering. Filtering is a property of the BGP peering settings found in the port settings configuration. This command works by performing a read-modify-write on the port settings configuration identified by the specified rack/switch/port.
Options
--allowed
Prefixes to allow for the peer
--direction
importexport
Whether to apply the filter to imported or exported prefixes
--no-filtering
Do not filter
--peer
Peer to apply allow list to
--port
qsfp0qsfp1qsfp2qsfp3qsfp4qsfp5qsfp6qsfp7qsfp8qsfp9qsfp10qsfp11qsfp12qsfp13qsfp14qsfp15qsfp16qsfp17qsfp18qsfp19qsfp20qsfp21qsfp22qsfp23qsfp24qsfp25qsfp26qsfp27qsfp28qsfp29qsfp30qsfp31
Port to add the filter to
--profile
Configuration profile to use for commands
--rack
Id of the rack to add the filter to
--switch
switch0switch1
Switch to add the filter to